Antique door lockset w/glass knob, lever, lock, plates, & screws. Beautiful, antique, door lockset salvaged from northeastern pennsylvania.The set consists of 1 glass knob w/steel shank or base, 1 steel lever, 2 stamped steel escutcheons, 1 steel mortise lock, 1 steel strike plate for the door jamb, and 1 spindle with 2 setscrews, and all 8 original installation screws. All steel parts were originally bronze plated, but some plating wore off over the years leaving the parts with a nice, distressed look. The lock is reversible and could accommodate either a left or right swing door.
If you have a door, or pair of doors with thin stiles (vertical side rails of a door), you know just how difficult it is to find a lockset with a thin lock. Not only does this set have such a lock, but it also has matching slim plates (great for doors that have stiles less than 3w) and an elegant, old-fashioned knob and lever combination, which adds a great, classic charm to the set. We removed the set from a handsome pair of antique, oak, french doors that are 1 3/4 thick (see last photo). We found the set with a lovely patina, which we opted to leave undisturbed.
The beauty of the set is only equaled by its superb condition there are no breaks, cracks, chips, dents, gouges, or heavy scratches. We opened, inspected, and sprayed machine oil on and around all internal parts of the lock to facilitate its movement. Since the doors were installed inside, the internal parts are very clean and free of rust and corrosion.
We included a photo of the lock opened so you could see how clean it is. Knob: 1 5/8" diameter x 1 1/4" d.Lever: 2 1/2"w x 1 1/2" d. Escutcheon: 1 7/8" w x 6" h.
(faceplate) 7/8" w x 5 1/8" h. (body) 2" w x 3 3/4" h x 5/8 d. (backset-distance from lock edge to center of the knob hole):1 1/2. Strikeplate: 7/8" x 3 5/8".
Asia, australia & europe:$39.99. This item is made of brass and glass, steel, iron.