These handmade baby/pet gates come totally customizable. Gates can come pained white, stained, or unfinished. Every gate can be used outside or indoor.Gates come with hardware to install. How to measure for the door. 1: measure the opening you wish to install the door. The door needs a minimum of a half inch on each side to clear properly, so subtract an inch for you measurement to find the width you need. Note that if mounding is present at the base of the floor the distance between the molding is what needs to be measured not the distance between the walls. 2: determine what height you would like, being sure to take into account how much clearance you would like between the door and the floor. 1: determine the size of the door you need. 2: select a color from this image along with hardware type (hardware on the options refers to the gate hinges and latches). 3: if opting for a stain please send us a message with your order letting us know which color you would like. 4: place your order and we will take care of the rest. If you have any other questions feel free to message me.