By purchasing our barn doors you'll get a very beautiful product finished with satin lacquer and it will be ready to be hung. We will provide a header board for a more secure installation.
For a a framed doorway. Measure from one end of the frame to the other end of the frame and add one or two inches so when you close door it will over lap the trim/molding on both sides so you don't see that trim at all. For the height of the door measure from the ground to the top edge of the trim and add 1/2 - 1 inch to cover the trim. For a not framed doorway.
To figure out the width measure the opening from side to side and add 4" to overlap 2" on each side. For the height just measure from the ground to the top of opening and add 1. Always make sure you have at least 6 above opening for the wheels and track to fit properly. Message us for a quote on your custom design today.
Dimensions are always customizable but prices will vary depending on dimensions. Don't see the design you want no problem, send me a picture along with the dimensions needed and i'll get back to you right away with a quote for your custom requests. Please allow 3-5 weeks for the product to be delivered.
Don't hesitate to contact me with any questions. All barn doors are not refundable. Due to we use natural solid wood, every piece made will have it's own characteristics and none of them will be exactly alike. Because we use solid wood, this is a natural product that responds to temperature and humidity variations by expanding and contracting.
Sometimes these changes may be a little noticeable in the physical appearance of the product and this will not be a structural defect or fault, but a natural occurrence within the fibers of a natural product. This item is made of alder and stain, solid wood, lacquer finish, finish nails.