Hardware only, door not included. Track length must be longer than the door opening (wall to wall distance). Make 2pcs of each door panel a little wider to cover the door opening , . If door opening is 60", 2pcs of each door panel width can be 34" (openning/2+4).
The gap between thk 40mm inner door panel and the wall is about 16mm, . Height from the top of the door panel to the top of the ceiling need at least about 300mm for reference. The gap between two door panel is about 2, pls make two door panel's width a little bit wider.Two rollers can bear max weight:90kg. Pre-drilled 16" or 17.7" holes on the track. Can't be used in drywall with stud. Elegance and function in one beautiful and affordable. Sliding track:2pcs5ft/5.5ft/ 6ft/6.6ft/ 8ft.
Sliding track: 4pcs5ft/5.5ft/ 6ft/6.6ft (note: 4 doors 8ft bypass kit use 2pcs 8ft track). Track to track connector : 2pcs (note: 4 doors 8ft bypass kit no need track to track connector). Us, ca customer will be offered wooden wall screw.
Other countries will be offered concrete wall screws if you didn't mentioned anything after you placed the order. If you received damaged items , .We are not sure each country's law, so we can't point out how much you need to pay. For detailed cost, pls kindly ask your local custom.