This system includes 4 hanger sets (8 hangers total). Black powdercoated finish with nylon wheels. (note: doors are not included). Hardware only, doors not included / this system requires 6 inches of clearance above door opening / this system requires at least 12 extra inches more of total door width than opening size. Because each set of doors overlap in the center where the wheels meet, you will need wider doors to ensure your doors cover the opening.
Door width must be 12 inches or larger than opening size. Each door can be 3 inches wider for a total of 12 inches of overlap between the 4 doors. This is the minimum amount of overlap and it is only if all hangers are mounted on outside edges of the doors-if you move the hangers in a bit-the overlap will increase which will require even wider doors.
The outer door on the track will sit out 5 from the wall. The measurement is 5 from wall to outside of outside door. You can make the track just the size of the opening to allow half the opening to be exposed at a time or you can span the track farther and allow the doors to push off the opening and completely expose the opening depending on how much wall space you have to mount the track. 4 sets of custom bypass hangers w/ 3 nylon wheels.
4 newly redesigned adjustable floor mounted door guides fit any size door. All hardware to attach the doors to the track and track to the wall. This item is made of steel and powdercoating, wheels, hardware, spacers, hangers.